Auto body repair in Houston
Auto body repair in Houston, from reshaping a dented door to replacing a panel that is past saving.
Auto body repair in Houston comes down to one call on each damaged panel: fix it or replace it. A shallow dent in a door can be worked back to shape. A creased fender with torn metal, or a panel on a crumple zone, usually gets replaced. We make that call panel by panel, explain it on your written estimate, and then prep and paint the repair so it disappears into the rest of the car. Free estimate first. All insurance claims welcomed.
- Panel repair, reshaping, and filler work where the metal allows it
- Panel replacement when the damage is creased, torn, or structural
- Doors, fenders, hoods, quarter panels, and trim
- Prep, prime, and paint to match the rest of the car
Send photos, get a number
Send a few photos of the damage and a quick description of what happened. Or just call us and we will walk you through it.
Signs you need auto body repair
What to check for after any hit.
- A dent or crease that did not break the paint.
- A cracked or torn bumper cover, fender, or door skin.
- Rust starting to bubble under the paint near a scratch.
- A gap between two panels that was not there before.
- Paint chipped down to bare metal on an edge or corner.
The repair, step by step
- 01
Repair or replace call
Each damaged panel gets a decision, worked back into shape or swapped for a new one, based on the metal's condition: torn, creased, or on a structural mount.
- 02
Panel and trim removal
Damaged panels, moldings, and lights come off the car so the metal underneath is fully visible.
- 03
Metalwork or panel fit
A repaired panel is worked back to its original shape. A replacement panel is bolted or welded in, with the gaps set to match the surrounding panels.
- 04
Filler, primer, and block sanding
Low spots get a thin layer of filler, then the panel is sanded flat and primed so the surface is ready for paint.
- 05
Paint and reinstall
The panel is painted to match the car, cured, reinstalled with its trim and lights, and checked for even gaps.
Auto body repair is the work of fixing or replacing the sheet metal and plastic panels on a car, including doors, fenders, and hoods, and in Houston it covers everything from a shopping cart dent to a fender torn open in a wreck. Every panel gets its own decision. One with unbroken paint can usually be worked back into shape, while a crease, a tear, or damage on a structural mounting point usually needs a new panel.
GTR Collision Houston makes that repair-or-replace call panel by panel, then matches the paint so the work disappears into the rest of the car. The shop is in Southwest Houston, and body work, paint, and the mechanical side of a repair all happen under the same roof.
What affects an auto body repair estimate
A shop decides repair or replace panel by panel. A dent with intact paint and full access from behind usually costs less than a creased or torn panel that needs a new part.
Bring your claim number and the adjuster's estimate, and the shop writes its own estimate to go with it. Any damage found once a panel is off gets documented and sent to the insurer.
What we look at
- Repair versus replacement on each panel
- OEM versus aftermarket parts
- Number of panels needing paint blend
- Trim, moldings, and lights removed and reinstalled
- Rust or prior bodywork found under the paint
Why this shop
One shop for body, frame, paint, and mechanical
Panel work, paint, and any mechanical repair a wreck left behind happen at one address instead of being split across vendors.
All insurance claims welcomed
Bring your claim number and adjuster's estimate. In Texas you pick the shop; an insurer cannot require a specific one.
A written estimate before any work
The repair-or-replace call on every panel goes on a free written estimate before anything is touched.
Questions before you call
A panel can usually be repaired when the metal is dented but not creased, torn, or stretched. Deep creases, torn metal, and damage on a structural mounting point usually mean replacement.
Yes. GTR Collision Houston at 9229 Bissonnet Street gives free written estimates on all body work.
Yes. Any panel that gets reshaped or replaced is primed and painted to match the car before it goes back on.
The cost depends on how many panels are damaged, whether each one can be repaired or needs replacing, and whether OEM or aftermarket parts are used. GTR Collision Houston gives a free written estimate before any work starts.
Surface rust can be sanded and treated before paint, but rust that has eaten through the metal needs the damaged section cut out and replaced. Left untreated, rust keeps spreading under paint in Houston's humidity.
No, frame and unibody straightening is a separate, more specialized repair. If a panel repair uncovers structural damage, GTR Collision Houston handles that as part of the same job.
Auto body repair in Southwest Houston
GTR Collision Houston is at 9229 Bissonnet Street in Southwest Houston, 77074. Search auto body shop near me from anywhere along Bissonnet or Sharpstown, and this is the shop handling the panel work, the paint, and what's underneath it.
9229 Bissonnet StreetHouston, TX 77074
Start your estimate
Send a few photos of the damage and a quick description of what happened. Or just call us and we will walk you through it.